for some work you need just the right tool...

Questions about 4WDs and related topics

Moderators: FORDification, Doug Comer

Post Reply
cash667
New Member
New Member
Posts: 100
Joined: Thu Mar 26, 2020 3:02 pm
Location: Germany

for some work you need just the right tool...

Post by cash667 »

...and this is IT if you have to deal with loads of snow like we have right now in some parts of germany

https://www.youtube.com/watch?v=jmK8uhKGF2s

:yt:
thats so awesome :thup:
is this guy around here? Even as I am no diesel fan - this truck build is really amazing... I´m a bit annoyed that I didn´t bought a 4wd. I think these tracks will work on a gas 460 too 8) :lol:

Cheers from cold germany
Chris
1968 Mercury Cougar 302
1968 Ford F250 Camper Special 429
User avatar
two-bit
Blue Oval Fan
Blue Oval Fan
Posts: 620
Joined: Thu Jul 06, 2006 6:19 pm
Location: Michigan, Ishpeming

Re: for some work you need just the right tool...

Post by two-bit »

cash667 wrote:...and this is IT if you have to deal with loads of snow like we have right now in some parts of germany

https://www.youtube.com/watch?v=jmK8uhKGF2s

:yt:
thats so awesome :thup:
is this guy around here? Even as I am no diesel fan - this truck build is really amazing... I´m a bit annoyed that I didn´t bought a 4wd. I think these tracks will work on a gas 460 too 8) :lol:

Cheers from cold germany
Chris
Don't sweat it the no 4wd to much. Its just more parts to maintain and repair.
In the U.P. of MI we have a few local fire departments that have that track drive set-up on rescue vehicles. Mostly the Jeep Cherokee vehicles 1995-2000 models. 4.0L I-6, 5 spd trans, manual shift t-case (231 J), with drive slugs (No lock-outs) on the front differential. They are VERY agile in deep snow, fairly light weight, capable of seating 5 persons, plus emergency supplies. Some areas where i live can receive up to 300 + inches, (7.60 + meters) of snow per season.

I have helped with maintenance on one of these vehicles. The track system can be pretty hard on axle shafts, u-joints, wheel bearings and steering components. Constant maintenance to make sure those rigs are ready is a must.

They are very cool to see in action. The advent of this system has saved a lot of lives by allowing EMS personnel to get places in 30 to 40 minutes, instead of hours.
Two-bit
Living life full throttle on the North Coast of America!!!

72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: for some work you need just the right tool...

Post by basketcase0302 »

="cash667"...and this is IT if you have to deal with loads of snow like we have right now in some parts of germany

https://www.youtube.com/watch?v=jmK8uhKGF2s

:yt:
thats so awesome :thup:

Is this guy around here?

Even as I am no diesel fan - this truck build is really amazing... I´m a bit annoyed that I didn´t bought a 4wd. I think these tracks will work on a gas 460 too 8) :lol:

Cheers from cold germany
Chris
Yeah Brian is here, (but can't remember his username). He has a few more video's on his truck on utube, (one maybe on the Cummins install). :thup:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
cash667
New Member
New Member
Posts: 100
Joined: Thu Mar 26, 2020 3:02 pm
Location: Germany

Re: for some work you need just the right tool...

Post by cash667 »

two-bit wrote:
cash667 wrote:...and this is IT if you have to deal with loads of snow like we have right now in some parts of germany

https://www.youtube.com/watch?v=jmK8uhKGF2s

:yt:
thats so awesome :thup:
is this guy around here? Even as I am no diesel fan - this truck build is really amazing... I´m a bit annoyed that I didn´t bought a 4wd. I think these tracks will work on a gas 460 too 8) :lol:

Cheers from cold germany
Chris
Don't sweat it the no 4wd to much. Its just more parts to maintain and repair.
In the U.P. of MI we have a few local fire departments that have that track drive set-up on rescue vehicles. Mostly the Jeep Cherokee vehicles 1995-2000 models. 4.0L I-6, 5 spd trans, manual shift t-case (231 J), with drive slugs (No lock-outs) on the front differential. They are VERY agile in deep snow, fairly light weight, capable of seating 5 persons, plus emergency supplies. Some areas where i live can receive up to 300 + inches, (7.60 + meters) of snow per season.

I have helped with maintenance on one of these vehicles. The track system can be pretty hard on axle shafts, u-joints, wheel bearings and steering components. Constant maintenance to make sure those rigs are ready is a must.

They are very cool to see in action. The advent of this system has saved a lot of lives by allowing EMS personnel to get places in 30 to 40 minutes, instead of hours.
Two-bit
Tow-bit,
all good - was just a kind of joke. I´m happy with what I got, no need for 4WD in the area where I live and winter like these days is once in 10 years.
It´s even much to expensive for me just for the fun of some days..

I can imagine that these tracks can by hard for the drive train, I now tracked vehicles from some times in Austria.

But I like this truck anyways. if Brian reads this thread - I would love to have some information on the drive train an axle components, just for interest.

:fr:

Cheers
Chris
1968 Mercury Cougar 302
1968 Ford F250 Camper Special 429
User avatar
hot-rod
New Member
New Member
Posts: 68
Joined: Thu Feb 12, 2015 6:20 am
Location: south germany
Contact:

Re: for some work you need just the right tool...

Post by hot-rod »

Chris,

i don't think we really need that in germany 8) For 10 cm of snow per year this is probably a bit exaggerated :evil: And please let me know when you go to the TÜV, I'll come with you :lol:
Post Reply