Forest Service Truck Coyote Swap
Moderator: FORDification
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
I just need to finish the inner cab corners, but the rust is removed for now. I'm guessing it will hold together for another 50 years. The drivers door has some and the rear bed under the tail light, but that is part of the patina! I'm saving those to remind myself how enjoyable rust repairs are and stay off ebay! LOL
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Another full day to fab these little pieces. Not really sure if thats how it was originally, but it will work for this truck.
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Same for drivers side. Seam sealed inner welds and sprayed some weld through primer.
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Getting busy now that its summer here in Wisconsin. It is so damn short you better do a few things or its back to winter before you know it. I got the inner cab corner panels welded in. Need to clean up bottom of truck and paint it next.
You do not have the required permissions to view the files attached to this post.
- hfdco4
- Blue Oval Guru
- Posts: 1314
- Joined: Mon Apr 01, 2013 1:45 pm
Re: Forest Service Truck Coyote Swap
Really good work on making poor quality parts fit.
Paul
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
- Fordkid68
- Preferred User
- Posts: 310
- Joined: Fri Oct 16, 2020 7:27 pm
- Location: Conneaut Lake, PA.
Re: Forest Service Truck Coyote Swap
Awesome work!! Looks great!
Adam
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
I got body work all finished up. I cleaned, sanded and epoxy primed bottom of truck. Next seam seal, 2K primer and topcoat.
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Two coats 2K primer and two coats top coat forest service green.
You do not have the required permissions to view the files attached to this post.
- Fordkid68
- Preferred User
- Posts: 310
- Joined: Fri Oct 16, 2020 7:27 pm
- Location: Conneaut Lake, PA.
Re: Forest Service Truck Coyote Swap
AWESOME!!!! Looks great!
Adam
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Finished painting. The exterior still needs a Mat clear coat at some point. Started installing gas tank. Cut lower frame rails and moved cross member to the rear. I am going to hang the tank with stainless steel straps so it can be serviced without pulling bed.
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Cleaned, prepped and painted remaining part of frame. Installed cab which is some welcome progress. Need to install front clip and bed to get everything aligned to drill front cab mount holes.
You do not have the required permissions to view the files attached to this post.
- Fordkid68
- Preferred User
- Posts: 310
- Joined: Fri Oct 16, 2020 7:27 pm
- Location: Conneaut Lake, PA.
Re: Forest Service Truck Coyote Swap
Amazing work! It must feel great to start putting things together after all that metalwork!
Adam
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Thanks Adam!!
- hfdco4
- Blue Oval Guru
- Posts: 1314
- Joined: Mon Apr 01, 2013 1:45 pm
Re: Forest Service Truck Coyote Swap
Great progress, this is going to be a real head turner soon!
Paul
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
-
- New Member
- Posts: 144
- Joined: Tue May 21, 2019 7:33 am
Re: Forest Service Truck Coyote Swap
Mustang 22 gallon fuel tank installed with stainless steel straps. I wanted tank serviceable without having to remove bed so it tucks up tight to bottom of frame.
You do not have the required permissions to view the files attached to this post.