2wd castor wedges ?
Moderator: FORDification
-
ChrisB
- New Member
- Posts: 73
- Joined: Thu Jul 28, 2005 6:57 pm
- Location: Southern California
2wd castor wedges ?
I thought I recall LMCTruck carrying them but don’t see them now, not seeing them pop elsewhere. Anyone have a set of those wedges?
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 2wd castor wedges ?
I don't ever recall seeing such a "white elephant" part for our bumps? I always thought the only way to change the front axle 2WD caster camber was by bending the I beam using a torch to heat the I beam and a press or frame rack?ChrisB
I thought I recall LMCTruck carrying them but don’t see them now, not seeing them pop elsewhere. Anyone have a set of those wedges?
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4