I am looking for a double sheave crank pulley for the 1967 F-100 4x2 352FE.
Part number
C1AZ-6A312-C crank pulley
Crankshaft pulley
Moderator: FORDification
-
SBR_GUY
- New Member
- Posts: 40
- Joined: Wed Apr 15, 2020 8:38 pm
- Location: Georgia
Crankshaft pulley
1967 F100 Styleside Longbed W/352FE. Tremec TKX 5 Speed.
Just loving life.
Just loving life.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Crankshaft pulley
I might have this. Sad part it would be buried under many heavy huge parts fiberglass boxes I just moved yesterday, (my back health puts at risk).=SBR_GUY
I am looking for a double sheave crank pulley for the 1967 F-100 4x2 352FE.
Part number
C1AZ-6A312-C crank pulley
I'll try to dig back down to it before the weekend is over to confirm.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4