240/300 I6 Acceleration/Transmission Linkage

[JWW]

I have a 240 that I'm working to get back together. However, I'm missing parts to get the "kick down" fully connected. Below is a diagram of the accelerator and transmission linkage (courtesy of FORDification). I am missing the parts that I have highlighted. I'm not too concerned with some of the bushings or washers. However, I do need the part numbers 7A394, 380340-S. I'm open to buying the full assembly as well if you don't have individual parts.



Thank you

[67 short box]

i have a complete setup off a 67 in very good shape, but its for a 3 speed manual on column. you may need different parts if you have an automatic.
just a thought.

[JWW]

i have a complete setup off a 67 in very good shape, but its for a 3 speed manual on column. you may need different parts if you have an automatic.
just a thought.

Thanks. Is your setup for sale?

[67 short box]

yes. make offer.

[JWW]

yes. make offer.

Can you post pictures of your set up? I want to be sure I don’t already have the parts. Thanks again.

[67 short box]

after looking at mine, i dont have those parts you have highlighted.

[67 short box]

after looking at mine, i dont have those parts you have highlighted.

[JWW]

after looking at mine, i dont have those parts you have highlighted.

Thanks for checking though. I appreciate it.

[67 short box]

you bet