Radio fuse size/amp rating original

Charging, starting, lighting, gauges, HVAC

Moderators: FORDification, Thunderfoot

Post Reply
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Radio fuse size/amp rating original

Post by mk »

I've got a bump radio here with the original lead (with inline fuse cartridge) from the under dash connector... but no fuse.
Does anyone remember the size/rating of this fuse 'cause I sure as heck don't and can't seem to find any info anywhere.
Thanks!
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
Fraser
New Member
New Member
Posts: 114
Joined: Wed Nov 23, 2022 10:17 am
Location: Western Canada

Re: Radio fuse size/amp rating original

Post by Fraser »

'67 owners manual states SFE-14 in the fuse panel, which seems high to me, my '67 Lincoln only uses a 7.5 amp. I have seen those radios with an inline holder, I would just try a 7.5 and see.
Edit, I just looked in my '67 Ford and Mercury truck service specifications book, it shows radio, SFE 7.5, cartridge in feed wire.
F. Noble, Saskatchewan.
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Radio fuse size/amp rating original

Post by mk »

Thanks! I realize that back then the radio was an optional accessory, but I would have thought they were common enough that the owners manual would have info but no dice.
Even at that, it seems to me the original fuse in the cartridge was very short, like 5/8" but the sfe 7.5 shows as 7/8" long. Guess I'll have to dig through my electrical goodie box to see what I can scare up :)
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
Post Reply