Regards
Official CNC milled aluminum parts for sale listing
Moderator: FORDification
-
390FE1972
- Blue Oval Fan
- Posts: 561
- Joined: Tue Jul 15, 2014 10:28 pm
- Location: Colorado Springs, CO
Re: Official CNC milled aluminum parts for sale listing
PM sent in regards to dome bezel & lens purchase
Regards
Regards
1972 F250 Sports Custom 390 FE C6 2WD Dana 60 4:10 gears
-
urchinhead
- New Member
- Posts: 75
- Joined: Sun Feb 08, 2015 12:11 pm
- Location: San Francisco, Ca
Re: Official CNC milled aluminum parts for sale listing
I am in need of a replacement lens for the dome light you sold me a few years back, if you still have any.
Also, do you have any of the proto-type visor clips for sale that never made it into full production? It looks like you are very busy, but I thought I may as well ask!
Also, do you have any of the proto-type visor clips for sale that never made it into full production? It looks like you are very busy, but I thought I may as well ask!
1970 F100 Custom 2WD, SWB, 360 FE, np435
1964 Galaxie 500 Convertible, 390, Cruise-o-Matic
http://i171.photobucket.com/albums/u309 ... fa6562.jpg
1964 Galaxie 500 Convertible, 390, Cruise-o-Matic
http://i171.photobucket.com/albums/u309 ... fa6562.jpg
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Official CNC milled aluminum parts for sale listing
Time to bump this thread back to the top for the newer members here who may not know these quality parts exist.
I had the visor pivot bracket/the ash tray pull, (original junk plastic always broken not longer made) / and the dome light bezel and cover which is 400% better than the old faded crap in our trucks!
Are you still making all of these Jamie?
I had the visor pivot bracket/the ash tray pull, (original junk plastic always broken not longer made) / and the dome light bezel and cover which is 400% better than the old faded crap in our trucks!
Are you still making all of these Jamie?
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
nastys toys
- Preferred User
- Posts: 319
- Joined: Wed Jul 28, 2010 5:39 pm
- Location: PA
Re: Official CNC milled aluminum parts for sale listing
Are any of the aluminum parts still being made? If so I would like to purchase a few.
-
Jbarnes79
- New Member
- Posts: 67
- Joined: Sun Nov 27, 2011 11:05 pm
Re: Official CNC milled aluminum parts for sale listing
LMC Truck has a few billet items. I bought the billet Ashtray handle and it's an excellent piece.
http://fordification.com/forum/viewtopic.php?t=67810
1969 F250 4x4
1969 F250 Crew cab (Sold)
1972 F250
1969 & 1970 Mustang
1969 F250 4x4
1969 F250 Crew cab (Sold)
1972 F250
1969 & 1970 Mustang