Just pick up a 72 f 100 with a 360.
I go to put the key in and it did nothing start the truck. I replace the starting relay. That did nothing to fix the problem. You can crank the truck over jumping the relay but nothing with the key.
I replace the ignition swith and the key tumbler with new. this still did not fix the problem
Could it be the coil or a wire on the coil causing this problem.
How would one go about troubleshooting then fixing this issue.
Ignition Problem
-
- New Member
- Posts: 3
- Joined: Wed Jun 07, 2006 10:46 pm
- Location: Washington
-
- Preferred User
- Posts: 336
- Joined: Thu Mar 02, 2006 8:21 pm
- Location: CANADA, BC VAN. ISLAND
- Contact:
-
- New Member
- Posts: 3
- Joined: Wed Jun 07, 2006 10:46 pm
- Location: Washington
re: Ignition Problem
It is Auto Trans, Where might that switch be located?
-
- New Member
- Posts: 3
- Joined: Wed Jun 07, 2006 10:46 pm
- Location: Washington
re: Ignition Problem
Well with your information I was able to get the truck started with the key. Thanks so much now I think I will have to fix that part
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
re: Ignition Problem
Glad you got it going!
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html