Speedostat aftermarket(?) cruise control question.

rjewkes · Post by **rjewkes** » Sat Feb 03, 2007 12:22 am

I know this was designed for the turn sig. switch mounted cruise but will it wire up to the factory cruise column?

Theres a harness that comes out to the firewall to attach to the deal that pulls the throttle open when you turn on/accelerate with the button.

but then it has a power dongle(computer power supply for hard drives and cd/dvd drives). That has the red wire with a fuse on it the rest go into tyhe box.

Any body know how this wires?

BTW it came out of a 77 f150 ext. cab with add on cruise control.

ICEMAN6166 · Post by **ICEMAN6166** » Sat Feb 03, 2007 2:44 pm

sorry, all the aftermarket cruise controls i have seen on the older trucks had a round sensor type thing under the cab reading driveshaft rotation.
i think the last one i saw was a sears model.

kid · Post by **kid** » Sat Feb 03, 2007 9:03 pm

I had an after market unit that read the plugs firing on one cylinder. It worked by keeping the RPM steady and would not engage below 1800. It would engage in any gear.

rjewkes · Post by **rjewkes** » Sat Feb 03, 2007 9:08 pm

ok i'll get you all a picture of what i have. The colum is factory w/cruise from a 77 f250. 460 c6.

The box is either factory add on at dealership/dso or an addon from a parts house.

heres pics added 9:25pm CST 2/03/07

The FORDification.com Forums

Speedostat aftermarket(?) cruise control question.

Speedostat aftermarket(?) cruise control question.

re: Speedostat aftermarket(?) cruise control question.