horn pad/button interchangability

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
User avatar
booblinker
New Member
New Member
Posts: 69
Joined: Mon Oct 24, 2011 6:23 pm

horn pad/button interchangability

Post by booblinker »

I have a 71-71 steering wheel. missing the horn pad, what other vehicles will work for it if any.
1969 F250 High Boy 360 4 speed
-3" Body Lift
-36x12.50 tires
-Edelbrock Intake, Mallory Distributor and coil, long tube headers, and true duals with flowmasters
-Who knows what else I haven't figured out
-1993 Ranger 3.slow 4x4 DD
-1971 F100 302 auto
-1985 Tri-z
-ATC70 with a 125 motor
-A few 200s's
72BahamaBlue
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Sat Aug 20, 2011 3:05 am
Location: Seattle Washington

Re: horn pad/button interchangability

Post by 72BahamaBlue »

1971-1976 trucks use the same horn pad. I've seen the same pad used in vans 70's through the 80's. Hard to find a good one, maybe someone here has an extra? I'll keep an eye out, going on a parts finding trek this entire weekend.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: horn pad/button interchangability

Post by basketcase0302 »

Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply