Can I put a 3/4 ton rear end on a 71 f100?
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 48
- Joined: Sun Apr 24, 2011 7:02 am
Can I put a 3/4 ton rear end on a 71 f100?
Getting my 71 F100 ready to pull a 24' travel trailer. Have a new 302 already. Going to put a sm block C6 on it. Can I...should I put a 3/4 ton rear end on it? Any advice on upgrades are welcome.
-
- Preferred User
- Posts: 449
- Joined: Sun Nov 27, 2011 6:24 pm
- Location: Garland, TX
Re: Can I put a 3/4 ton rear end on a 71 f100?
You can upgrade to 3/4 spring or just add a leaf or two. There really isnt a reason to change rear ends. The 9 in. is a tough axel.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Can I put a 3/4 ton rear end on a 71 f100?
Same engine/tranny combo I've got in my one ton and loving it. The 9" is pretty bulletproof like Casey said. The chebby guys throw 500+ ponies at them all day at drag strips. Gotta' also remember you'd have two different wheel bolt patterns.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4