Hi, I am having a hard time finding the o ring for the front spindle on my 1970 F250 Camper Special. It mounts just behind the rotor against the bearing grease seal. Anyone know where I can obtain them?
Thanks
Don
front spindle o ring
Moderator: FORDification
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: front spindle o ring
Have you tried DC?=ARTDECODON post_id=773887 time=1647047560 user_id=122107
Hi, I am having a hard time finding the o ring for the front spindle on my 1970 F250 Camper Special. It mounts just behind the rotor against the bearing grease seal. Anyone know where I can obtain them?
Thanks
Don
https://www.dennis-carpenter.com/
If so with no luck, then try Green Sales.
http://greensalescompany.com/
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4