Hi all, after over a year of no problems, got all the parts I used and info into a "guide" on how to swap to disc on bump sides using the 76+ calipers without having to swap all the ibeams and everything on a '67 2WD F250.
https://docs.google.com/spreadsheets/d/ ... qk/pubhtml#
Lots of other random information on these trucks in there too.
As seen installed here:
https://www.youtube.com/watch?v=ugKFRnr ... eFR4AaABAg
1967 F250 2WD Front Disc Brake Swap Info
Moderator: FORDification
-
- New Member
- Posts: 1
- Joined: Fri Dec 02, 2022 5:25 pm
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 1967 F250 2WD Front Disc Brake Swap Info
Please go over to the welcome mat when you get a chance.
And BRAVO!!!
Guys here with the 8 lug F-250 and F-350 have been looking for an easier front disc brake option for over 20 years now.
AS FAR AS I'M CONCERNED THIS POST SHOULD BE MADE A 'STICKY'!!!
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 117
- Joined: Wed Nov 23, 2022 10:17 am
- Location: Western Canada
Re: 1967 F250 2WD Front Disc Brake Swap Info
Great option. And I have most of the parts already.
F. Noble, Saskatchewan.