|
|
|
|
|
Steering Column Parts Differences |
|
|
 |
|
|
Under
Construction - Last Update: 01/01/10
NOTE: Items listed might have other
applications (other than '67-'72 F100/350 models) that are not included
here. The part numbers and
specifications shown at the
Steering Column parts numbers
page are as reported in the 1964-1972 Ford
Truck Master Parts Catalog 1975 Final Issue. However,
some of those numbers are not representative of the
original factory parts, since some parts had been deemed
obsolete by the time the '75 Final Issue catalog was
released, and by that time some parts had been replaced by
other service parts which, though fit and functioned as the
originals, did not have the same appearance as the
originals.
Specifically, the pieces we're discussing include:
the horn button
the turn signal lever
HORN BUTTON / HORN RING
From the factory, all '67 horn rings and buttons were
chrome-plated (a one-year-only item for the '67s), while the
'68-'70 horn rings buttons had an argent (satin) finish. |
|
By the time the 1975 Final Issue MPC was
released, the '67 chrome horn rings and buttons had been
replaced as service parts with the argent-finish '68-'70
pieces. But by looking in the individual parts catalogs
for each individual year, we can get the original
information:
|
13A805 -
Button, Horn (1967)
(as reported in the 1967 Ford
Truck Parts Catalog) |
| |
'67 F100/350 Standard Cab |
C3TZ-13A805-B |
Button - "Ford" |
| |
'67 F100/350 Custom Cab |
C3DZ-13A805-C |
Horn ring - includes (1)
emblem |
13A805 -
Button, Horn (1968)
(as reported in the 1968 Ford
Truck Parts Catalog) |
| |
'68 F100/350 Standard Cab |
C3TZ-13A805-C |
Button - "Ford" |
| |
'68 F100/350 Custom Cab |
C3DZ-13A805-D |
Horn ring - includes (1)
emblem |
|
I don't currently have a '69 Parts
Catalog, so I can't look up the numbers for 1969.
For the '70 model year, the parts catalog was in two
volumes, with the horn button/ring information being
listed in Volume 2, which I don't currently have,
but has just been purchased and is currently enroute,
so this info will be posted shortly.
The January 1975
O.S.I. Catalog shows C3DZ-13A805-C (chrome
horn ring), C3TZ-13A805-B
(chrome horn button) C3TZ-13A805-C
(argent-finish horn button) as being replaced with
C3DZ-13A805-D (argent-finish horn ring) as a
service replacement.
TURN SIGNAL
LEVER
As delivered from the factory, all '67-'69 F100/350
trucks had a turn signal lever (C7TZ-13305-A -
Fig. 06 and 07) with a painted stem (color-matched to
interior color) and a black fluted knob (Group 7213). However, by
the time the '75 Final Issue MPC was issued, this
turn signal lever had been rendered obsolete, and
future service replacements used the '70-'72 chromed
piece. |
13305 -
Lever Assembly, Turn Signal
(as reported in the 1967 and 1968
Ford Truck Parts Catalogs) |
| |
'67-'68 F100/350 |
C7TZ-13305-A |
Black knob |
|
Fig. 06 - 1967-1969
(C7TZ-13305-A) |
Fig. 07 - 1967-1969
(C7TZ-13305-A) |
|
|
|
The original part
number (C7TZ-13305-A) is shown in the January
1972 O.S.I. catalog (which includes numbers which have
been changed between 1/1/67 and 10/31/72) as being
replaced with C6OZ-13305-B.
The January 1975 O.S.I. catalog shows
that by July 1975 D0AZ-13305-A
became the standard service replacement, replacing the
following turn signal lever part numbers:
- C6OZ-13305-B (Mix with D0AZ-A)
- C7TZ-13305-A
-
C8AZ-13305-B (Mix with D0AZ-A)
- C9TZ-13305-A
-
D3TZ-13305-A
 |
|
|
 |
Want to link to
this site? Please save this banner to your hard drive to place on your
webpage.
The correct link to use is
http://www.fordification.com
|
