A testament to our Ford trucks and Motorcraft parts

Charging, starting, lighting, gauges, HVAC

Moderators: FORDification, Thunderfoot

Post Reply
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

A testament to our Ford trucks and Motorcraft parts

Post by basketcase0302 »

You gotta love this one!

Well it started yesterday as simply replacing the alternator belt, yeah right...
It had been squealing like a pig, (it was loose).

One 3/4 turn on the adjuster bolt and snap! Now i've got a broken bolt in the alternator "ear".
With 90% of my tools still in storage and nowhere to work, (nope, still aint' got the barn built yet).
It's much easier to replace the alternator, than to drill and easy-out the bolt.

Yeah, I've got spare alternators in storage but can't get to them!
Ok, now let's go ahead and replace the alternator, (just in case it was the bearings "squealing" in it and not the belt).

I pulled the original 1971 Motorcraft alternator out of the truck, that was still charging!
After some 35+ years it was still ticking!


Just can't beat Ford's and Motorcraft parts reliability with a stick! :thup:
Bet I get maybe three years life from the mexico assembled/lifetime warranty junk I was given?
And, the "stamped" location of the ground wire on the alternator was wrong, the wiring ground strap can't go onto the screw identified as such.
You have to use the "other" screw.
Maybe this post should be in vendor feedback?
Watch your ground strap on the autozone alternator's guys.

Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
ToughOldFord
100% FORDified!
100% FORDified!
Posts: 1911
Joined: Mon Jul 25, 2005 10:47 pm
Location: Communist California, USA

re: A testament to our Ford trucks and Motorcraft parts

Post by ToughOldFord »

I know it, it's amazing how many of these trucks are still running around with original parts and engines. They really did know how to make them in the day.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

mine still has alot of stock stuff on it. the alt is for sure.
User avatar
lightning_msd
Preferred User
Preferred User
Posts: 403
Joined: Sun Nov 19, 2006 2:57 pm
Location: Medicine Hat, Alberta, Canada
Contact:

re: A testament to our Ford trucks and Motorcraft parts

Post by lightning_msd »

i still got the original alt. from 1966 (my truck was built in fall 1966) hell the whole truck works fine :thup:
User avatar
THATCH
New Member
New Member
Posts: 4
Joined: Tue Dec 25, 2007 1:23 pm
Location: las vegas

re: A testament to our Ford trucks and Motorcraft parts

Post by THATCH »

i was forced to replace my 390 when i found out i had 2 cracked heads and a wrist pin that wanted to be in the water jacket..... amazingly that motor ran pretty good. and yes my orig. 72 alt still works.
User avatar
MaxKlinger
Blue Oval Fan
Blue Oval Fan
Posts: 541
Joined: Tue Jun 05, 2007 9:07 am
Location: Philadelphia

re: A testament to our Ford trucks and Motorcraft parts

Post by MaxKlinger »

Alternators have come a long way since the 70s, with huge improvements seen in the bearings and voltage regulators. They're generally a lot more reliable today than they were, at least as far as OEM goes (not including the Mexican made replacements). I put an Alternator in my friend's '72 when we were in high school (2001) and his truck had only 18,000 original miles on it (VFD truck). I still have the original alternator in my Sable after 211,000 miles.

These were solid trucks for their time. I frequently take a nostalgic "they don't make e'm like they used to" attitude, but realistically modern vehicles are a heck of a lot less maintenance intensive, more efficient, and (a huge one for me) MORE CORROSION RESISTANT. In the northeast, 60s, 70s, and 80s vehicles rusted apart before they wore out; now the bodies are on par with the drivetrains. My truck has rusted more in the past year in the garage than my Sable has sitting outside in a couple of years.
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
Post Reply