
Dash - re-cover or replace?
Moderator: FORDification
- fordkenstein
- New Member
- Posts: 33
- Joined: Mon Jun 06, 2011 7:25 pm
- Location: Folsom, California
Dash - re-cover or replace?
LMC has an adhesive dash cover for about $100 and a replacement dash pad for about $400. When is a dash pad too far gone to re-cover? Any opinions on which way to go? Money IS an object, but it would be a waste of $100 to attempt to re-cover an un-re-cover-able dash.


Fordkenstein
1970 Ranger XLT LWB (Size Matters!)
351c / AOD / 9in
Lowered!
1970 Ranger XLT LWB (Size Matters!)
351c / AOD / 9in
Lowered!
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Dash - re-cover or replace?
I believe that "cover" they sell is just that. A cover that simply sits on top of your original dash-not an actual piece similar to recovering a seat. Maybe someone else here can chime in that knows a little more about it. 

Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- fordkenstein
- New Member
- Posts: 33
- Joined: Mon Jun 06, 2011 7:25 pm
- Location: Folsom, California
Re: Dash - re-cover or replace?
You do not have the required permissions to view the files attached to this post.
Fordkenstein
1970 Ranger XLT LWB (Size Matters!)
351c / AOD / 9in
Lowered!
1970 Ranger XLT LWB (Size Matters!)
351c / AOD / 9in
Lowered!
- Bob
- Preferred User
- Posts: 275
- Joined: Thu Jan 04, 2007 2:47 pm
- Location: WESTERN PENNSYLVANIA
Re: Dash - re-cover or replace?
One thing I can tell you about the new replacement dash pad is the defrost vents slots are not the same as factory.
You'll need to cut a piece of rod to lay in the center slot so the windshield defrosts out to the sides. Otherwise all you air blows straight up. The center hole is too big and the bulk of the air heads out it.
They look good and bolt up fine though. All fifty thousand nuts...
I considered going with the cover but thought it'd probably look... like a cover... instead of original dash.

They look good and bolt up fine though. All fifty thousand nuts...

I considered going with the cover but thought it'd probably look... like a cover... instead of original dash.

- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Dash - re-cover or replace?
Most the covers I've seen were poor fitting, they simply lay over the top of the original dash pad.These covers are made from molded heat resistant plastic...

Maybe someone here that has one can chime in. I'd love to get a new one for my truck!

Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- crewdcab
- New Member
- Posts: 169
- Joined: Thu Nov 05, 2009 1:48 am
- Location: Cut Bank, Montana
Re: Dash - re-cover or replace?
Never used on on a bump, but did try one on a 84 Chebby. It was not good. Defroster vents didn't fit, didn't sit tight on old dash, Adheasive held for about a month. Ended up buying a new one. IMO, save your money.
68 F-100 68 F-100 4x4 shortbed 69 F-100 shortbed
70 F-100 70 F-250 Crew 71 F-250 4x4
72 F-250 4x4 72 F-250 Camper Special Explorer
75 F-250 4x4 77 F-250 4x4 77 F-250 4x4 Crew
70 F-100 70 F-250 Crew 71 F-250 4x4
72 F-250 4x4 72 F-250 Camper Special Explorer
75 F-250 4x4 77 F-250 4x4 77 F-250 4x4 Crew
-
- Blue Oval Fan
- Posts: 623
- Joined: Sat Jul 12, 2008 11:45 pm
Re: Dash - re-cover or replace?
you could always go without a pad. all you have to do with the vents is take the grates out of your old pad and screw them in. it's how they were done on the big trucks.


1967 f100 stepside 300ci I6
1969 f100/600 stepside retro truck -under construction-
1972 longbed trailer
1969 f100/600 stepside retro truck -under construction-
1972 longbed trailer
- Calfdemon
- 100% FORDified!
- Posts: 2672
- Joined: Tue May 25, 2010 11:31 pm
- Location: California, Santa Clarita
Re: Dash - re-cover or replace?
I have the molded plastic dash cover on my truck and it looks good. At first look, it looks exactly like the dash pad. Depending on how you glue it on the existing dash pad, it can look like mine or even better. I just did it quick and didn't take my time and I have a couple of slight "bumps" near the heater vents as a result. But again, the dash cover is well worth it for the savings in cost compared to a new dash pad.
Pictures of mine are in this previous thread: http://fordification.com/forum/viewtopi ... 046c4b04ba
Pictures of mine are in this previous thread: http://fordification.com/forum/viewtopi ... 046c4b04ba
-Rich
Current toys -
69 Ford F350 Crew Cab - 460 / C6 - http://i253.photobucket.com/albums/hh67 ... lqgskp.jpg
31 Ford Vicky - 1955 270 Red Ram Hemi / 4 speed - http://i253.photobucket.com/albums/hh67 ... bsibvn.jpg
Former toys -
67 Pontiac Firebird 400 convertible (sold 9/13) - http://i253.photobucket.com/albums/hh67 ... bird-1.jpg
67 Ford Fairlane GT - 390 / 4 speed (sold 7/15) - http://i253.photobucket.com/albums/hh67 ... c5hu8z.jpg
Current toys -
69 Ford F350 Crew Cab - 460 / C6 - http://i253.photobucket.com/albums/hh67 ... lqgskp.jpg
31 Ford Vicky - 1955 270 Red Ram Hemi / 4 speed - http://i253.photobucket.com/albums/hh67 ... bsibvn.jpg
Former toys -
67 Pontiac Firebird 400 convertible (sold 9/13) - http://i253.photobucket.com/albums/hh67 ... bird-1.jpg
67 Ford Fairlane GT - 390 / 4 speed (sold 7/15) - http://i253.photobucket.com/albums/hh67 ... c5hu8z.jpg
-
- New Member
- Posts: 28
- Joined: Wed Jan 04, 2012 3:00 pm
- Location: Roy Washington
Re: Dash - re-cover or replace?
I got one with my truck and it looks good. Be sure to spend the time to prep the dash. Sand down any high spots, clean the heck out of it, then glue it and use rolls of paper towels wedged against the window and other means to force it to stay down till dry.
No, it will not be as perfect as the original, but does look very good.
No, it will not be as perfect as the original, but does look very good.
Fred-72 f250 Highboy 360/435/Dana 24
- fordkenstein
- New Member
- Posts: 33
- Joined: Mon Jun 06, 2011 7:25 pm
- Location: Folsom, California
Re: Dash - re-cover or replace?
I think it looks pretty good without the pad too. Am I crazy?
Fordkenstein
1970 Ranger XLT LWB (Size Matters!)
351c / AOD / 9in
Lowered!
1970 Ranger XLT LWB (Size Matters!)
351c / AOD / 9in
Lowered!
-
- Preferred User
- Posts: 285
- Joined: Thu Jan 27, 2011 2:09 am
- Location: Victoria B.C. Canada
Re: Dash - re-cover or replace?
I got one of those plastic covers for my truck and yes it does not fit perfect. the defrost holes are slightly off (1/4"). But for the 70$ I think it looks great. No one has ever noticed that it is a cover. My truck is far from a show truck but I want it to look pretty good for cheap, so this fit the bill. 

1970 ranger 4x4
1965 mustang needs resto
flh shovelhead
rigid evo
1965 mustang needs resto
flh shovelhead
rigid evo
-
- New Member
- Posts: 9
- Joined: Thu Feb 02, 2012 8:26 am
Re: Dash - re-cover or replace?
I like it without the pad too. I'll be removing mine when I get around to working on the interior of the beast.
- couchcuts
- New Member
- Posts: 77
- Joined: Tue Jan 10, 2012 12:08 pm
- Location: California
- Contact:
Re: Dash - re-cover or replace?
Until I saw your thread I was not sure , but I definately have the dash cover.
The previous owner of the truck put one in and I think it looks good.
Just like 70 ranger I do not need the truck to be a show truck, I just want it to look nice and clean inside and the dash cover seems to do the trick.
....the no dash is a nice look as well that is for sure....
these are the best photos of the dash cover that I have with me, I hope it helps...


The previous owner of the truck put one in and I think it looks good.
Just like 70 ranger I do not need the truck to be a show truck, I just want it to look nice and clean inside and the dash cover seems to do the trick.
....the no dash is a nice look as well that is for sure....
these are the best photos of the dash cover that I have with me, I hope it helps...
http://www.fordification.com/forum/view ... 22&t=64227
1970 F100 Custom Wimbleton White 240 c6 shortbed
1970 F100 Custom Wimbleton White 240 c6 shortbed
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Dash - re-cover or replace?
I recently bought one from a member that had been actually recovered with vinyl by gluing. Except for couple of places where the glue has come loose, on the back and end, it looks just like brand new. I'll reglue it down when I get ready for it.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- 1971fordcustom
- Blue Oval Fan
- Posts: 501
- Joined: Wed Feb 28, 2007 3:12 am
- Location: Mountain View Arkansas
Re: Dash - re-cover or replace?
Just RePlace it! I bought a NEW one from JCW a few years back!
I have like two post on it!
http://www.fordification.com/forum/view ... =6&t=30314 There is a Photo!
I have like two post on it!
http://www.fordification.com/forum/view ... =6&t=30314 There is a Photo!
http://s205.photobucket.com/albums/bb31 ... d%20F-100/
1971 F-100 Explorer Special custom
1971 F-350 Flatbed
1966 Ford Galaxie!
1966 Ford F-250 4x4
1960 Ford F-750 FireTruck
1960 Gmc 6000 FireTruck
1962 IH R-185 Firetruck
1959 Ford Custom 300
1940 Ford Truck
1971 F-100 Explorer Special custom
1971 F-350 Flatbed
1966 Ford Galaxie!
1966 Ford F-250 4x4
1960 Ford F-750 FireTruck
1960 Gmc 6000 FireTruck
1962 IH R-185 Firetruck
1959 Ford Custom 300
1940 Ford Truck