Wanted - 390 parts and 67 F100 parts needed

[indy358]

Have you found what you are looking for yet? I have the mounting hardware for a 390 out of a 67.

Still looking

Ok. I'll snap some pics today so you can see what I have and if it's what you need.

[indy358]

http://a7.sphotos.ak.fbcdn.net/hphotos- ... 7760_n.jpg

These are all the brackets that came off the 390 when I pulled it from the truck. Do they look like what you need?

[davbell22602]

I need the bolts and nuts that hold motor mounts to the block and engine bracket.

[indy358]

I need the bolts and nuts that hold motor mounts to the block and engine bracket.

I have them but I honestly don't know which ones they are. They got thrown in a bucket with all the others from a 72 I tore down several years ago.

[kaitlyn]

i have core support 909 5568229

[davbell22602]

Bump

[davbell22602]

67 spare tire carrier with hardware
blue seatbeats
radiator support for 390
390 radiator for automatic
67 sun visors
390 flexplate - need 3
driveshaft for a auto c6 2wd w/8ft on a 1/2 ton
window weatherstripping
door weatherstripping
shift indicator window
390 engine motor mount hardware
390 dizzy hold down clamp
390 radiator fan shroud
67 headlight doors aluminum/chrome ones
heater control valve
horn relay
horn(s)
horn wiring harness
67 door jam (2)
67 wiring harness no cargo switch
brake warning light switch
cargo switch delete panel
door sills
67 headlight rings
67 washer pump
67 taillight harness for a 8ft bed
67 door jam brackets
passenger side inner fender
chrome stainless steel rear window molding/trim
chrome stainless steel windshield molding/trim

[davbell22602]

Still need parts

[davbell22602]

Still need parts

[davbell22602]

bump

[Ranchero50]

I have a bunch of radiators, bunches of horns and both sets of glass trim.

If the '67 sun visors are the same as the '68's, I have them too.

[davbell22602]

Do have radiator for 2wd 390 automatic? How many core? If so got pics? How much?

[Ranchero50]

I've come to the conclusion I don't know what I have

I have 2 V8 radiators that I thought were 360 ones. One I'm sure is a 3 core repro that came from a '68 F100 with a 302 and has the fan shroud. It looks like new. I thought it was a 360 one because I have another 2 core manual that looks the same but I just found anlther fan shroud hanging on the wall of the shed. I'm not sure anymore. I also have another that has a wider mounting base but I have no idea which truck it was sourced from. I'm sure one of these 302 radiators was in my '71 F250 with the 360...

I also have a super cooling radiator that uses the special radiator support. I should have two but can only find one...

Here's the pics of the repro and the 302 shroud.







Do you have your original radiator? I you bring it up we can figure if it'll work for you.

Here's a picture of the trim... I have 2 complete windshield sets and one rear window set. They are 7-8 of 10 parts, some dings and marks.

[davbell22602]

I dont have the original one. the PO of the truck sold 352 and radiator. He had thoughts to use a 302 in a 67 F100 instead. I sold the 302 and decided to go back to the FE type engine. All I have is a manual 302 radiator. Other that i go the dimensions on LMC for radiator size.

[Ranchero50]

Well, I was reading my new DC catalog last night and they say the 360 / 390 shroud fan opening is 20.75" which is what mine are. The '68 truck had no reason to come equiped with a fan shroud so I figure it was added sometime.