New Engine for The "Speed Bump"!
Moderator: FORDification
- Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: New Engine for The "Speed Bump"!
Awesome!
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
- SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I work for the Air Force as a DOD civilian and I've been furloughed twice this year. I couldn't justify insuring and titling another vehicle when I wasn't sure if I was going to get paid or not so my F100 has been patiently waiting in the garage to be driven. I'm keeping my fingers crossed that I won't be furloughed again and I can finally put my Bump on the road this spring.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: New Engine for The "Speed Bump"!
Was wondering what was going on with your project. Hope you're on the road soon!
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
Re: New Engine for The "Speed Bump"!
Me too! We'll all keep our fingers crossed as well! I'm still building as much as I can get away with and hope to be joining you on the road in the spring as well. Take care!
Patrick
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
- SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I've finally started the ball rolling to get my Bump on the road. I sent picures and all the documentation to Grundy Collector Car insurance to see if we agree on the value. I should hear from them Tuesday. Then it's off to do battle with DMV to get the title transferred to Delaware. It sounds pretty nasty through the 3-inch exhaust and race bullet mufflers. It scares the crap out of my wife every time I start it in the garage!
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: New Engine for The "Speed Bump"!
Looks great! Have you driven it yet? If not, I'm not too sure you'll be keeping those 4.11's
I have 3.50's. Off the line, I can roast my 13" drag radials for as long as I keep my foot in it. If I don't lift out of the gas, it will go around.
I have 3.50's. Off the line, I can roast my 13" drag radials for as long as I keep my foot in it. If I don't lift out of the gas, it will go around.
- SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
BobbyFord,
I'm waiting on the insurance to drive it. I'm sure it will annihilate the tires no problem! I plan on upgrading to 31 spline axles at some point and I'll contemplate a gear change then. I already had the 4.11s and Detroit Locker from a Mustang project.
I'm waiting on the insurance to drive it. I'm sure it will annihilate the tires no problem! I plan on upgrading to 31 spline axles at some point and I'll contemplate a gear change then. I already had the 4.11s and Detroit Locker from a Mustang project.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: New Engine for The "Speed Bump"!
Make sure you show us a videoSVT522 wrote:BobbyFord,
I'm waiting on the insurance to drive it. I'm sure it will annihilate the tires no problem! I plan on upgrading to 31 spline axles at some point and I'll contemplate a gear change then. I already had the 4.11s and Detroit Locker from a Mustang project.
-
- Preferred User
- Posts: 442
- Joined: Tue Aug 02, 2011 11:27 pm
- Location: Tallapoosa, Georgia
Re: New Engine for The "Speed Bump"!
Glad your back at it! Can't wait to hear/see a video of it too.
My build thread...http://www.fordification.com/forum/view ... 22&t=67317
- SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
My new hood emblems showed up today.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
- SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I just got back from my first drive. Yep it's bad assed! I can't wait to get a couple of tanks through it and then beat on it some! It has no problem spinning the tires running down the road.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: New Engine for The "Speed Bump"!
Sweet! Can't wait for some videos
-
- New Member
- Posts: 104
- Joined: Mon Apr 22, 2013 9:31 pm
- Location: Sonoma County, CA
Re: New Engine for The "Speed Bump"!
Congrats on getting it on the road!
glad to see you get to enjoy some windshield time after all of the hard work
glad to see you get to enjoy some windshield time after all of the hard work
1972 Ford F100 SWB Styleside 300ci I6 3OTT
1965 Mustang 289 T5 4 Weel Disc Brakes
1972 Chevy Blazer 4x4 350/350
1955 Chevy Big Window SWB Stepside
1965 Mustang 289 T5 4 Weel Disc Brakes
1972 Chevy Blazer 4x4 350/350
1955 Chevy Big Window SWB Stepside
- SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I took it through the state inspection lane this morning and transferred the title to Delaware. I tried to put antique tags on it and they wouldn't let me because it doesn't sound stock.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
- New Member
- Posts: 20
- Joined: Sat May 17, 2014 11:41 am
Re: New Engine for The "Speed Bump"!
Ah, the "antique" classification. In Oregon, the formula is some compicated thing that basically adds one newer year of car to the list every other year ('57s finally are antiques here. in 2016, '58s will be).SVT522 wrote:I took it through the state inspection lane this morning and transferred the title to Delaware. I tried to put antique tags on it and they wouldn't let me because it doesn't sound stock.
What about a Special Purpose vehicle registration? I'd say its purpose is pretty special