I put in a substantial order to NPD the other day, and have been pretty irratated so far. I asked for a gas pedal, which they dont list, guy sends me a mustang one, nice, but wont fit without some modification.
Now my newest problem, got a set of rollers for the regulators, not a chance in hell they will work. Has anyone else bought these? Where did you buy them from, if they worked.
Thanks!
NPD regulator rollers?
Moderator: FORDification
-
Darrman
- Preferred User
- Posts: 315
- Joined: Thu Feb 08, 2007 11:34 pm
- Location: Texas, Waxahachie
-
fmartin_gila1
- Preferred User
- Posts: 284
- Joined: Wed Jul 25, 2007 9:20 am
- Location: Arizona, Globe
re: NPD regulator rollers?
The Ford Dealership
Fred
Fred
-
390Nut
- Blue Oval Guru
- Posts: 1052
- Joined: Sat Oct 16, 2004 1:23 pm
- Location: Fife, WA
re: NPD regulator rollers?
What about these?
Paul
`69 F100 390 4spd driver
http://www.fordification.com/galleries/ ... ?cat=10251
Dura-Spark II Conversion info at:
http://home.comcast.net/~390nut/Dura-SparkII.htm
Pipes71 did once say, "bumps and bikes.. what a great combo!"
`69 F100 390 4spd driver
http://www.fordification.com/galleries/ ... ?cat=10251
Dura-Spark II Conversion info at:
http://home.comcast.net/~390nut/Dura-SparkII.htm
Pipes71 did once say, "bumps and bikes.. what a great combo!"
-
Darrman
- Preferred User
- Posts: 315
- Joined: Thu Feb 08, 2007 11:34 pm
- Location: Texas, Waxahachie
Those look the exact same as what I have, however the outside diameter on mine is 1 inch, while theirs is 3/4, that would solve the problem of not fitting in the track.
However the inside for both is 3/8, and thats way too big, it has to be 1/4.
I am about to say the heck with it and get new regulators,
.
However the inside for both is 3/8, and thats way too big, it has to be 1/4.
I am about to say the heck with it and get new regulators,
.