need to re-skin factory buckets
Moderator: FORDification
-
Whateverman
- Blue Oval Guru
- Posts: 1257
- Joined: Sat Jan 08, 2011 6:45 pm
- Location: Comox Valley B.C. Canada
need to re-skin factory buckets
I've got some factory buckets in my truck & while putting my headliner back in managed to not only blow the stitching but crack the 41yr old vinyl as well...the foam & etc is all in primo shape so all i really need is some new upholstery - any suggestions on where the best place to look would be?
- still got my first first car 20+yrs later : 69 f100 sorta kinda pretending its a Mercury M100 w/a 70 f350 sport custom cab (factory buckets) 67 grille with 69 ranger cooneyes 68 merc box and hood,some supercool fiberglass fenders i scored way back when, 76 f150 disc brake frontend..currently running a 90 5.0HO 4bbl/c4 auto & 3.50 posi...originally a 360/c6 f100 Ranger with dealer added towpack (incl. kelsey hays trailer brake),boxside toolbox,behind the seat stowage & belly tank...only original parts left on 'er are the frame,rear end,rear springs,and rear bumper...
-
91Bear
- Blue Oval Fanatic
- Posts: 991
- Joined: Wed Mar 09, 2005 10:31 am
- Location: Texas, San Antonio
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: need to re-skin factory buckets
I believe that Dennis Carpenter has these. Anything I've ever gotten from them was top quality stuff. 
http://www.dennis-carpenter.com/
http://www.dennis-carpenter.com/
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
Whateverman
- Blue Oval Guru
- Posts: 1257
- Joined: Sat Jan 08, 2011 6:45 pm
- Location: Comox Valley B.C. Canada
Re: need to re-skin factory buckets
Thanx guys
- still got my first first car 20+yrs later : 69 f100 sorta kinda pretending its a Mercury M100 w/a 70 f350 sport custom cab (factory buckets) 67 grille with 69 ranger cooneyes 68 merc box and hood,some supercool fiberglass fenders i scored way back when, 76 f150 disc brake frontend..currently running a 90 5.0HO 4bbl/c4 auto & 3.50 posi...originally a 360/c6 f100 Ranger with dealer added towpack (incl. kelsey hays trailer brake),boxside toolbox,behind the seat stowage & belly tank...only original parts left on 'er are the frame,rear end,rear springs,and rear bumper...