68 F100 parts for sale

[wrongway]

I've got an all original 240 six cylinder engine complete with 46K original miles for sale. I took it out of my 68 to go a different route. After a quick tuneup it fired right up and ran good. Oil pressure was 60lb plus cold and I haven't noticed any leaks. I would like to get $500.00 OBO for it picked up and I will ship at buyers expense. All offers welcome on it too. I also have a set of 302 engine perches and BNIB motor mounts from LMC that I bought from a member on here. I also have a brand new set of trailing arm bushings for a two wheel drive that I also bought from a member on here that I don't need and they are Ford bushings. I'd like to get $40.00 shipped on the bushings and $100.00 shipped on the engine perches. I also have a complete disc brake setup from a 77 two wheel drive Ford. Trailing arms can be included but I would have to completely take it apart to ship. All parts are in central Florida. I jumped the gun and bought a lot of parts and then decided to put a Crown Vic frontend and a 302 in my truck. Willing to work with you some if needed. I'm also looking for a power steering pump and correct brackets for a 70 302 engine. Also willing to trade for some things and looking for an automatic steering column, AOD transmission (2 wheel drive) Thanks

[hotrod ford]

Do the disc brakes also come with the spindles? If so, I''m interested in them.

[wrongway]

Yes sir, it is complete. Spindles, calipers, rotors, trailing arms just like it came off of the truck. I'll see if I can get a picture posted for you in a little while.

[hotrod ford]

Hey Wrongway, I don't need the trailing arms. All I really need is the spindles, calipers and rotors. I'm rebuilding my entire front end and found that one of the spindles were bad. So you have the spindles and disc brakes so why not. Just need to make sure the new king pins for a 71 will fit your 77 spindles. Oh, how much are you asking?

[wrongway]

Lowretta 065.JPG

I would like to get $150.00 plus shipping.

[hotrod ford]

I can't do that. All I need really is one spindle, but if I got the disc I would take both. I have all brand new parts besides the I-beams and trailing arms to also include all bushings and steering rods, king pins and ect..

[wrongway]

It comes with everything you see in the picture. Let me know if you change your mind.

[wrongway]

Still for sale, if I'm out of line on the prices feel free to make offers.

[wrongway]

Shoot me some offers on this stuff, need it out of my way. Thanks

[676870F100]

were are you at in central fl.

[wrongway]

I'm in Lakeland

[sargentrs]

'77 king pins are a different length and diameter than '71. You'd really need the i-beams too. Trailing arms may work.

[wrongway]

Engine has been sold, still have all of the disc brake setup complete. Make offers, I need the spare room.

[wrongway]

Complete front end has been sold and picked up. Thanks for your interest