Sanden Compressor in place of York Compressor

[uboughtwhat?]

Has anyone replaced their York Compressor with a Sanden unit?

I am curious how they mount to the York plate.

[fitzwell]

Napa Temp (everco/murray ) used to make a kit for that. Let me look tonight & get the # off the box.

[fitzwell]

Has anyone replaced their York Compressor with a Sanden unit?

I am curious how they mount to the York plate.

Everco A9999. 4 bolts to the york plate, small saddles to mount the Sanden unit. Not a very complicated thing. If i would join the dig it all age, i could get a pic. might be able to this week with the cell phone

[Thunderfoot]

Here is one that a guy did on a 67 Mustang that shows some good photos... http://www.mustangandfords.com/howto/25 ... index.html

Do a Search for "York Compressor to a Sanden adaptor" it will bring up several links to look at...
I think that getting the right bracket for the adjuster for the engine will be the only concern...

[Finleyphoto]

If i would join the "dig it all" age, i could get a pic. might be able to this week with the cell phone

Check with Amazon(dot)com

Look at the $200 range Kodak's and Canon's and a 2gb card. (1000 shots)

Once you get the hang of Photoshop, you'll never go back to film unless you're a purist.

..and if that's the case, then I recommend you get a 4x5 view camera!


Dennis

[460 crew]

There is an adaptor plate the lays flat on the york mount and bolts to it. This mount has ears on it for the sanden to bolt to and it does have adjustment to make sure it'll line up. I got mine when I ordered my hurricane AC setup from Old air products. I belive it was like 50 -60 bucks.

[wt4speed#2]

If i would join the dig it all age, i could get a pic. might be able to this week with the cell phone

Dude I have a camera and you have my # and it ain't like I have to drive for days(matter of fact I could probably walk down faster than I could find the keys to the Rodeo)