I think I need one like in the picture. I am heaving a headache swapping radiator since it started leaking. First I had to replace the water pump to get the outlet on the wrong side. Autozone had the wrong water pump in the box. Now trying to get power steering on, my old bracket won't work with new pump.
All this after the first radiator was too small. I went with the American eagle radiator.
Anyway, back to the bracket.
302 power steering bracket
Moderator: FORDification
- bjde0b
- Preferred User
- Posts: 402
- Joined: Mon Dec 08, 2008 9:54 pm
- Location: Youngsville, LA
302 power steering bracket
Check out my build. http://s1088.photobucket.com/albums/i336/MyF100/
- rmurphy
- Preferred User
- Posts: 305
- Joined: Sun Jul 24, 2011 1:55 pm
- Location: Prairieville, Louisiana
Re: 302 power steering bracket
I think I may have one. I'll look tomorrow.
- bjde0b
- Preferred User
- Posts: 402
- Joined: Mon Dec 08, 2008 9:54 pm
- Location: Youngsville, LA
Re: 302 power steering bracket
I didn't ever hear back from Mr. Murphy. Is there anybody else out there that may have this bracket?
Check out my build. http://s1088.photobucket.com/albums/i336/MyF100/
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: 302 power steering bracket
Are you talking about just the bracket in the bottom photo or both brackets, the one that holds the pump too?
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- bjde0b
- Preferred User
- Posts: 402
- Joined: Mon Dec 08, 2008 9:54 pm
- Location: Youngsville, LA
Re: 302 power steering bracket
I think I will probably need both. I am changing from a Torino water pump to the truck, which is affecting my brackets. I have an aluminum bracket on the pump currently, but I don't know if it will work with just the engine side.
I will take whatever I can get.
I will take whatever I can get.
Check out my build. http://s1088.photobucket.com/albums/i336/MyF100/
- bjde0b
- Preferred User
- Posts: 402
- Joined: Mon Dec 08, 2008 9:54 pm
- Location: Youngsville, LA
Re: 302 power steering bracket
how about a bracket like this?
Check out my build. http://s1088.photobucket.com/albums/i336/MyF100/