So over the weekend while doing a master cylinder on my truck I discovered this jumper tucked up and out of the way. I have not looked into running the wires down yet. But the jumper almost looks factory.
Anyone able to ID what is happening here?
Thank you
Jake
Some identification help please
Moderators: FORDification, Thunderfoot
-
Gaslight
- New Member
- Posts: 70
- Joined: Mon Feb 15, 2010 10:46 pm
- Location: Camarillo, California
- Contact:
Some identification help please
You do not have the required permissions to view the files attached to this post.
1969 F100 Ranger
-
cep62
- 100% FORDified!
- Posts: 2061
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Some identification help please
If you have a manual trans it might bypass the neutral safety switch.
-
Gaslight
- New Member
- Posts: 70
- Joined: Mon Feb 15, 2010 10:46 pm
- Location: Camarillo, California
- Contact:
Re: Some identification help please
No manual. 360 with a C6. I am hoping to get the chance in the next day or so to trace wires. But its a mystery.
Jake
Jake
1969 F100 Ranger
-
DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: Some identification help please
Have look here:
https://www.fordification.com/tech/schematics_h.htm
Fairly sure that the backup light harness for a manual.
https://www.fordification.com/tech/schematics_h.htm
Fairly sure that the backup light harness for a manual.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
Gaslight
- New Member
- Posts: 70
- Joined: Mon Feb 15, 2010 10:46 pm
- Location: Camarillo, California
- Contact:
Re: Some identification help please
Thank you. I did not get a chance to investigate further last night. But I will take a look there first.
Jake
Jake
1969 F100 Ranger